90V Gas Discharge Type Surge Arrester - 2 Electrode
Store
Gas discharge arresters are ideal for quenching high voltage, fast rise- time interference transients. They are very high impedance (virtually open circuit) in the normal state with a typical capacitance of 1pF between electrodes. When a voltage spike appears, they arc over and present a relatively low impedance in this condition effectively quenching the spike. They are suitable for protection of telecom lines and antenna circuits. They are not recommended to be fitted across mains circuits as the low source impedance of the mains could destroy these device after the fault spike has cleared. - They are a well- proven and reliable device.- Four models are offered.- PCB Mount- 2 ELECTRODE TYPED.C. Spark-over Voltage (100V/s)90V +/- 20%
Packaged Dimensions
0.8cm(Length) x 0.8cm(Width) x 6.5cm(Height)
Discover more
90V 3 Electrode Gas Discharge Type Surge Arrester
CAT.NO: RS5424
Available for delivery
230V Gas Discharge Type Surge Arrester - 2 Electrode
CAT.NO: RS5422
Available for delivery
230V 3 Electrode Gas Discharge Type Surge Arrester
CAT.NO: RS5426
Available for delivery
2A Grey Standard Blade Fuse
CAT.NO: SF2127
Available for delivery
90°C Thermal Circuit Breaker
CAT.NO: ST3825
Available for delivery
6 Way Fuse Gang Block - 57 x 90mm
CAT.NO: SZ2007
Limited stock for delivery