EV CHARGER AC 7-22KW WITH 5M CABLE

The ePenguin LP-03 is a versatile fixed AC EV charger suitable for either 240 V single-phase 32 A or 400 V three-phase 32 A installations. It provides up to 7.4 kW on single phase and up to 22 kW on three phase. Actual charging power depends on the vehicle's onboard charger (OBC), the available electrical supply and the installation configuration.

The charger supports plug-and-play operation and RFID-authorised charging. Its Wi-Fi-connected web app allows users to complete setup, schedule a charging start time, monitor energy consumption, select charging modes, and start or stop a charging session.

A built-in display shows charging status and fault information in real time. A full-length LED status indicator provides a clear, at-a-glance indication of the charger's operating status.

The IP65-rated enclosure is suitable for indoor or outdoor installation when the charger is installed in accordance with the installation instructions. The LP-03 has a compact, lightweight design, standby power consumption below 5 W, a 1 m input cable to support installation, and an operating temperature range of -30 °C to +50 °C.

Built-in protection functions include overvoltage, overcurrent, leakage, earthing, overtemperature and surge protection, together with control pilot (CP) fault detection. The charger also incorporates RCD protection and 6 mA DC residual-current detection. These functions help support safe and reliable operation.

Installation must be carried out by a licensed electrician in accordance with the installation instructions and applicable electrical requirements.

Specifications:
- Maximum Charging Current: 32A
- Maximum Charging Capacity: 22kW
- Housing Protection: IP55 (unmated), IP65 (mated)
- Mounting method: wall or column pole
- Total Length: 5 meters
- Standby power: 5w
- Connector Plug: Type 2 (EN 62196-2 compliant)
- Cool mode:  Natural cooling
- User interface:  LED/LCD/RFID/Wifi

Safety Design:
-    Over voltage protection
-    Under voltage protection
-    Over current protection
-    Residual current protection
-    Over temperature protection
-    CP protection
-    Lightning protection
 

Note: Installation needs to be done by an electrician. Please check your EV specification to confirm the maximum rate it can charge from AC power, as many EVs can not charge at 22Kw - BYD Atto max is 7Kw Single-Phase, Tesla 3/Y is 11Kw-Three phase.