
Suitable for automotive and marine applications.
Features:*Resistance @ 20ºC: 0.0123 ohm/m
*Max temp.: 80ºC
* Current capacity: 15A
*Stranding: 2/26 x 0.2mm
*Insulation: PVC
Sold by the metre: WH-3079
15A Twin Core Power Cable - 30m Roll - White Black
Customer Reviews
3.5
6 reviews
Verified purchases only.
Powered by Bazaarvoice.
Usable within it's constraints,
Soldering this size cable needs some skill and a decent soldering iron, keep in mind there is a lot of copper to bring up to temperature for the solder to flow and copper is an excellent conductor of heat. Yes it is challenging but doable and reasonably well. That said with this size and larger cable I prefer crimping the connectors. I do wish that the current ratting was a bit more honest considering this cable is for low voltage and DC applications.
Great once I learned how to use it
I did not like this cable initially because I couldn't solder it, after reading reviews, using ai to solve my issues, adjusted my soldering iron to 400 degrees C and it solders great, just gotta be fast, and not even that fast, great for crimping too, I use a 60w soldering iron, no issues.
Great for crimping, hopeless with solder
For the most part this cable is good. The reason I gave it two stars is the insulation has a very low melting point which is terrible for soldering. The insulation shrinks away from the solder joint exposing wires and if there is too much heat it melts off the wire. It works well for crimped connectors.
Great
Great product, maybe get some lessons on how to solder.
Hopeless for soldering the conductor
I absolutely agree with another reviewer - Hopeless if soldering. Outer sheath melts away Really quickly & pulls back. If on an angle, the sheath melts off the bend leaving the conductor exposed. Poor for soldering to plugs/sockets - impossible to make a clean joint. Very disappointing, because past that it generally has good mechanical toughness & is well suited for use in a vehicle.
Decent wire but the insulation is fairly soft, makes it flexible but if soldering does become soft and expanded next to the wire if doing decent sized connections.