12V Reversing Camera with Bracket

 Ideally it should be fixed to an area above your rear licence plate, or any area other suitable nearby area. The wide angle lens and minimum illumination of 0.5 Lux will you give you a more than adequate view of potential hazards behind your vehicle. Supplied with a 6m wiring and video loom cable.

Specifications:
•    Sensor: PC7070
•    Resolution: 420 TV lines
•    Minimum Illumination: 0.5Lux
•    Video out: 1Vp.p. 75 ohm
•    Power Supply: 8-12Vdc
•    Operating temperature: -20 - +75 deg C, RH95 maximum   

Note: the video extension cable includes a red wire at each end for sending a +12v signal from the camera to headunits that need this signal to switch to the reversing camera display. Do not power the camera from this extension wire - it only needs power from the wiring harness with the red and black tinned wires.